Click HERE to visit Tektron's website.
|
|
|
|
Model: TK6J5
(High quality Stereo tube Preamplifier) |
|
|
Features: |
Matched tubes: 6J5 x 2 - GZ32 x 1 - Separate Volume control (L/R). High quality components |
|
|
Inputs: |
3 Line inputs high impedance (100 Kohm) |
|
|
Outputs: |
2 outputs: 1 adjust via potentiometer (Volume L/R) - 1 fixed for tape |
|
|
Power Supply: |
110/220 VAC - 50/60Hz |
|
|
Finish: |
Solid wood with pure electrolytic copper top plate |
|
|
Notes: |
Price without tubes - Many tubes, old, N.O.S., or new available, please ask. |
|
|
Additional Info: |
6J5 Tubes supply by chockes for better quality |
|
|
Price: |
$2000.00 USD |
|
|
|
|
|
|
|
Model: TK2A3/50M
(Hi-quality Monoblock tube final amplifier) |
|
|
Features: |
These amplifiers with the turn of a switch can run 2A3's, 45's, 245's, 345's, 300B's,50's,250's,350's, and VT52's in the output stage. 45's 1.8 watts, 50's 3.5 watts, 300B's 5.5 watts [The transformers are built in house, for correct performance parameters, with all, these output tubes.] These are the most versatile READY BUILT amplifiers available today.... and at a very reasonable price. New, antique, and NOS tubes available, for these amplifiers.
|
|
|
Inputs: |
1.8 W with 45 - 2.5 W with 2A3 - 3.5 W with 50 - 5.5 W with 300B |
|
|
Outputs: |
4/6 - 8/16 ohm (other impedance available upon request) |
|
|
Power Supply: |
110/220 VAC - 50/60Hz |
|
|
Finish: |
Solid wood with pure electrolytic copper top plate |
|
|
Notes: |
Price without tubes - Many tubes, old, N.O.S., or new available, please ask. |
|
|
Additional Info: |
The 80 tube type can be replaced with 5Z3 tube type |
|
|
Price: |
$3300.00 USD |
|
|
|
|
|
|
|
Model: TK2A3/50S
(High quality stereo tube final amplifier) |
|
|
Features: |
These amplifiers with the turn of a switch can run 2A3's, 45's, 245's, 345's, 300B's,50's,250's,350's, and VT52's in the output stage. 45's 1.8 watts, 50's 3.5 watts, 300B's 5.5 watts [The transformers are built in house, for correct performance parameters, with all, these output tubes.] These are the most versatile READY BUILT amplifiers available today.... and at a very reasonable price. New, antique, and NOS tubes available, for these amplifiers.
|
|
|
Inputs: |
1.8 W with 45 - 2.5 W with 2A3 - 3.5 W with 50 - 5.5 W with 300B |
|
|
Outputs: |
4/6 - 8/16 ohm (other impedance available upon request) |
|
|
Power Supply: |
110/220 VAC - 50/60Hz |
|
|
Finish: |
Solid wood with pure electrolytic copper top plate |
|
|
Notes: |
Price without tubes - Many tubes, old, N.O.S., or new available, please ask. |
|
|
Additional Info: |
The 80 tube type can be replaced with 5Z3 tube type |
|
|
Price: |
$2500.00 USD |
|
|
|
|
|
|
|
Model: TK2A3/50S-I
(Hi-quality stereo tube integrated amplifier) |
|
|
Features: |
These amplifiers with the turn of a switch can run 2A3's, 45's, 245's, 345's, 300B's,50's,250's,350's, and VT52's in the output stage. 45's 1.8 watts, 50's 3.5 watts, 300B's 5.5 watts [The transformers are built in house, for correct performance parameters, with all, these output tubes.] These are the most versatile READY BUILT amplifiers available today.... and at a very reasonable price. New, antique, and NOS tubes available, for these amplifiers.
|
|
|
Inputs: |
1.8 W with 45 - 2.5 W with 2A3 - 3.5 W with 50 - 5.5 W with 300B |
|
|
Outputs: |
4/6 - 8/16 ohm (other impedance available upon request) |
|
|
Power Supply: |
110/220 VAC - 50/60Hz |
|
|
Finish: |
Solid wood with pure electrolytic copper top plate |
|
|
Notes: |
Price without tubes - Many tubes, old, N.O.S., or new available, please ask. |
|
|
Additional Info: |
The 80 tube type can be replaced with 5Z3 tube type |
|
|
Price: |
$2900.00 USD |
|
|
|
|
|
LAMHORN 1.8 |
|
|
Features: |
The RL Acoustique Lamhorn 1.8 incorporates the simplicity of a single driver and horn configuration to deliver the ultimate in musical enjoyment with no crossover induced distortions, distortions that rob the music of proper timing and emotional impact. One has to hear a high quality horn of this nature to fully appreciate the immediacy and palpability of the music. These qualities are further enhanced with the internal use of pure silver wire, which bring the listener another step closer to the performance.
|
|
|
Cabinet: |
The Lamhorn 1.8 uses the finest materials available. The cabinet is made of 25 mm ( 1" ) 17 ply, Brazilian Birch plywood without any voids. This wood is heavier and more dense than MDF of the same thickness. All internal and external wood surfaces are finely sanded and sealed before being screwed and glued together. The cabinet is finished with matched oak veneers as standard with rosewood optional. Matching grills are also supplied |
|
|
Wiring: |
Internal wiring is pure silver foil GOERTZ supplied by Alpha-Core. It is the finest available and enables the music to flow with unmatched balance. Binding posts are Cardas Silvers.
|
|
|
Drivers: |
The Lamhorn 1.8 comes standard with REPS R-1 or AER MK-1 full-range drivers. However, Lowther drivers can be fitted without any modifications to the cabinet. Please visit our links on each of these excellent offerings. RL Acoustique is now the exclusive North American distributor for the AER MK-1!
|
|
|
Finish: |
Natural, Red Oak, Black Oak, and optional Rosewood Available Finishes |
|
|
Dimensions: |
127 cm H. x 33 cm W. x 43 cm D. (50" x 13" x 17") |
|
|
Weight: |
66 Kg. each (145 Lbs.) |
|
|
Price: |
$8650.00 USD |
|
|